What to do if TV aerial cable was not connected during Auto Set Up on JVC hr-xvs30ek DVD Player?
If the TV aerial cable was not connected to the unit when Auto Set Up was performed on your JVC DVD Player, turn off the unit once and connect the TV aerial cable to the unit properly, then turn on the unit again. Then perform Auto Set Up again.
What to do if JVC hr-xvs30ek playback picture does not appear?
If the playback picture does not appear while the tape is running on your JVC DVD Player, make sure the DVD deck is selected. Press the VCR/DVD button repeatedly until the DVD indicator lights up. Alternatively, press the DVD button on the remote control until the DVD indicator illuminates.
How to fix JVC DVD Player region code error?
If your JVC DVD Player displays “REGION CODE ERROR!” on the TV screen, it means the disc's region number doesn't match the unit's. Use discs with region numbers that include “ALL” or “2”.
Why JVC DVD Player disc cannot be played?
If your JVC DVD Player disc cannot be played back, and you're using an RF connection, ensure the TV receiver's channel selector is set to the correct video channel. If you are using the AV or Component Video connection, set the TV to its AV mode.
What to do if SCART cable was not connected during Preset Download on JVC DVD Player?
If the fully-wired 21-pin SCART cable was not connected between the TV and the unit when Preset Download was performed on your JVC DVD Player, turn off the unit once and connect the fully-wired 21-pin SCART cable to the unit properly, then turn on the unit again. Then perform Preset Download again.
How to fix JVC hr-xvs30ek DVD Player JPEG files with incorrect file extension?
If JPEG files do not have the correct file extension in their file names on your JVC DVD Player, add the correct file extension (.jpg, .jpeg, .JPG, .JPEG or any uppercase and lowercase combination such as “.Jpg”) to their file names.
How to start recording with JVC hr-xvs30ek?
To start recording on your JVC DVD Player, ensure that a cassette is loaded and that its record safety tab has not been removed. If the tab is removed, cover the hole with adhesive tape.
Why JVC hr-xvs30ek image of TV broadcast appears distorted?
If the image of the TV broadcast appears distorted on the TV screen with your JVC DVD Player, turn off the unit, or press VCR to select the S-VHS deck, then press TV/VCR so that the VCR indicator disappears from the front display panel.
How to fix JVC DVD Player noise during normal playback?
If your JVC DVD Player has noise during normal playback, it might be due to the automatic tracking mode being engaged. Try switching to manual tracking.
How to fix JVC hr-xvs30ek timer recording not working?
If your JVC DVD Player timer recording won’t work, re-perform the clock and/or timer settings. Also, press # and confirm that “#” is displayed on the front display panel to engage the timer.
General| TV Tuner | Yes |
|---|---|
| Media Type | DVD |
| DVD Standard | DVD-Video |
| Connectors | Composite Video, S-Video, SCART |
| Region Code | 2 |
| Video Playback Formats | MPEG-2 |
To Next Page
