To Next PageTo Next PageWhy can't I record TV broadcasts on my JVC HR-XVC27U?
If TV broadcasts cannot be recorded on your JVC DVD Player, it may be because “F-1” has been selected as the input mode. Set the input mode to the desired channel.
Why is the clock incorrect on my JVC HR-XVC27U after Auto Clock Set?
If the clock is incorrect even after performing Auto or Semiauto Clock Set on your JVC DVD Player, it's likely that the clock setting data received from the host channel is incorrect. Try selecting a different host channel during 'Semiauto Clock Set', or perform 'Manual Clock Set'.
Why is the TV broadcast image distorted on my JVC HR-XVC27U DVD Player?
If the image of a TV broadcast appears distorted on your TV screen while using the JVC DVD Player, it could be because the unit is left on and the DVD deck is selected. Turn off the unit, or press VCR to select the VCR deck, then press TV/VCR so that the VCR indicator disappears from the front display panel.
What to do if the '#' blinks on my JVC DVD Player and timer disengages?
If '#' blinks for 10 seconds and the Timer mode disengages, it means TIMER was pressed when there are no programs in memory, or the timer record information has been programmed incorrectly. Check the programmed data, re-program as needed, and then press TIMER again.
Why can't I change audio/subtitle language on JVC HR-XVC27U DVD Player?
If changing the audio or subtitle language is not possible on your JVC DVD Player, it's likely because the disc does not contain audio or subtitles in multiple languages. With some discs, the language should be set on the top menu.
What to do if recording cannot be started on JVC HR-XVC27U DVD Player?
If you can't start recording on your JVC DVD Player, check if a cassette is loaded and hasn't had its record safety tab removed. Insert a cassette or, if the tab is removed, cover the hole with adhesive tape.
How to operate the DVD deck on JVC HR-XVC27U?
To operate the JVC DVD deck, press VCR/DVD repeatedly on the unit until the DVD indicator lights up. Alternatively, press DVD on the remote so that the DVD indicator illuminates.
Why is timer recording not working on my JVC HR-XVC27U?
Timer recording won't work if the clock or timer settings are incorrect. Re-perform the clock and timer settings. Also, ensure the timer is engaged by pressing TIMER and confirming that '#' is displayed on the front display panel.
What to do if my JVC HR-XVC27U won't play a disc?
The JVC DVD Player may not play the disc for several reasons: * The disc's region number may not match the unit. In this case, use discs whose region number includes 'ALL' or '1'. * The disc type may be unplayable. Consult the section on 'Unplayable Discs'. * The disc may not be placed properly. Remove the disc and place it correctly in the disc tray. * The Parental Lock might be engaged, and the disc's rating is higher than the set level. Either temporarily release the Parental Lock or change the set level.
General| Brand | JVC |
|---|---|
| Model | HR-XVC27U |
| Category | DVD Player |
| Language | English |
Covers essential safety precautions for product use and electrical hazards.
Details safety rules for installation, grounding, power, and ventilation.
Covers safe usage, cleaning, heat, servicing, and damage risks.
Addresses moisture condensation, mobile phones, and placement advice.
Explains playable/unplayable discs, region codes, and disc file organization.
Provides instructions on loading, handling, and caring for discs.
Identifies and explains buttons, indicators, and ports on the front of the unit.
Details the various input and output connectors on the rear of the unit.
Explains the operation and features of the remote control unit.
Guides on connecting the unit to the TV via RF or AV.
Instructions for S-VIDEO connection for DVD.
Instructions for Component Video connection for DVD.
Automatic clock and tuner channel setup process.
Guides on selecting the appropriate monitor type for DVD playback.
Procedures for setting on-screen language for VCR and DVD decks.
Guides on setting the clock and tuning channels manually or semi-automatically.
Steps for loading a cassette and starting playback.
Details on still picture, slow motion, search, and playback controls.
Covers basic recording, timer, express timer, and satellite recording.
Instructions for loading discs and starting DVD playback.
Covers navigating menus, search, audio, subtitle, angle, and picture settings.
Guides on playing MP3 and JPEG files from discs.
Procedures for editing from camcorders and other recorders.
Steps for dubbing DVD to VCR and digital audio transfer.
Instructions for connecting to audio decoders or amplifiers.
Explains picture control, sound monitor, and timer settings for VCR.
Covers resume function, parental lock, and scan mode settings for DVD.
Guides for resolving power, tape transport, and playback problems on VCR.
Solutions for DVD, MP3, JPEG playback, and recording errors.
Addresses other system issues and frequently asked questions.
Provides detailed technical data for general components and the tuner.
Lists technical details for the VCR and DVD deck sections.
