JVC KD-AHD69

Bluetooth settings
You can change the settings listed on the right column
according to your preference.
1 Select "BT PHONE" or "BT AUDIO."
2 Enter the Bluetooth menu.
3 Select "SETTINGS."
4 Select a setting item.
r-- AUTO CNNCT 4 ~ AUTO ANSWER*1 ~
L.. VERSION -MIC SETTlNGll-l_MSG INFO*2-J
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
S Change the setting accordingly.
26
Setting menu (_: Initial)
• AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with ...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found first.
• AUTO ANSWER
Only for the device being connected for "BT PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
• MSG INFO (message info)
Only for the device being connected for "BT PHONE."
AUTO: The unit informs you ofthe arrival of
a message by ringing and displaying
"RCV MESSAGE" (receiving message).
• The display illuminate in blue (see
"RING COLOR" on page 29).
MANUAL: The unit does not inform you of the arrival
of a message.
• MIC SETTING (microphone setting)
Only for the device being connected for "BT PHONE."
Adjust the volume of the microphone connected to the
Bluetooth adapter.
LEVEL 01/02/03
• VERSION
The Bluetooth software and hardware versions are
shown.
Bluetooth settings
You can change the settings listed on the right column
according to your preference.
1 Select "BT PHONE" or "BT AUDIO."
2 Enter the Bluetooth menu.
3 Select "SETTINGS."
4 Select a setting item.
r-- AUTO CNNCT 4 ~ AUTO ANSWER*1 ~
L.. VERSION -MIC SETTlNGll-l_MSG INFO*2-J
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message.
S Change the setting accordingly.
26
Setting menu (_: Initial)
• AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with ...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found first.
• AUTO ANSWER
Only for the device being connected for "BT PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
• MSG INFO (message info)
Only for the device being connected for "BT PHONE."
AUTO: The unit informs you ofthe arrival of
a message by ringing and displaying
"RCV MESSAGE" (receiving message).
• The display illuminate in blue (see
"RING COLOR" on page 29).
MANUAL: The unit does not inform you of the arrival
of a message.
• MIC SETTING (microphone setting)
Only for the device being connected for "BT PHONE."
Adjust the volume of the microphone connected to the
Bluetooth adapter.
LEVEL 01/02/03
• VERSION
The Bluetooth software and hardware versions are
shown.