15
ENGLISH
Indication, [Range]
BAS *
2
(bass), [–06 to +06]
Adjust the bass.
MID *
2
(mid-range), [–06 to +06]
Adjust the mid-range frequencies sound level.
TRE *
2
(treble), [–06 to +06]
Adjust the treble.
FAD *
3
(fader), [R06 to F06]
Adjust the front and rear speaker balance.
BAL *
4
(balance), [L06 to R06]
Adjust the left and right speaker balance.
S.BS *
2
(super bass), [S.BS ON or S.BS OFF],
[01 to 05, initial: 03]*
5
Maintain the richness and fullness of the bass sound
regardless of how low you set the volume.
SUB.W *
1
(subwoofer), [00 to 08, initial: 04]
Adjust the subwoofer output level.
VOL (volume), [00 to 30 or 50 *
6
]
Adjust the volume.
*
1
Displayed only when “L/O MODE” is set to “WOOFER”
(see page 17).
*
2
When you adjust the bass, mid-range, treble, or super
bass, the adjustment you have made is stored for the
currently selected sound mode (iEQ) including “USER.”
*
3
If you are using a two-speaker system, set the fader
level to “00.”
*
4
The adjustment will not affect the subwoofer output.
*
5
Range adjustment for super bass is adjustable only
when it is set to “S.BS ON.”
*
6
Depending on the amplifier gain control setting. (See
page 17 for details.)
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table that follows.
1
2 Select a PSM item.
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
Continued on the next page
EN14-19_KD-PDR51_003A_1.indd 15EN14-19_KD-PDR51_003A_1.indd 15 11/8/06 4:13:19 PM11/8/06 4:13:19 PM
To Next Page
Loading...
