33
ENGLISH
Item Contents
DIGITAL AUDIO OUTPUT
(D. AUDIO OUTPUT)
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear. For details, see page 65.
• PCM ONLY (PCM) : Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS or MPEG Audio, or
connecting to a recording device.
• DOLBY DIGITAL/PCM (DOLBY DIGITAL) : Select this when
connecting an amplifier or a decoder compatible with Dolby Digital.
• STREAM/PCM (STREAM) : Select this when connecting an
amplifier or a decoder compatible with Dolby Digital, DTS, and
MPEG Audio.
DOWN MIX
When playing back a multi-channel DVD disc, this setting affects the
signals reproduced through the LINE OUT jacks (and through the
DIGITAL OUT terminal when “PCM ONLY (PCM)” is selected for
“DIGITAL AUDIO OUTPUT (D.AUDIO OUTPUT)”).
• DOLBY SURROUND : Select this when you want to enjoy multi-
channel surround audio by connecting an amplifier compatible with
Dolby Surround to this receiver.
• STEREO : Normally select this.
D. (Dynamic) RANGE
COMPRESSION
(D. RANGE COMP.)
You can enjoy a powerful sound at low or middle volume levels
while playing a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON : Select this to always use this function.
To Next Page
Loading...
Need help?
General
