44
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2 Select “PSM” menu.
3 Select a PSM item.
Ex.: When you select “Dimmer”
4 Adjust the PSM item selected.
5 Repeat steps 3 and 4 to adjust the
other PSM items if necessary.
6 Finish the procedure.
Indications Selectable settings, [reference page]
WallPaper
You can select the background picture of the monitor from these:
Standard, Red, Amber, Green, SkyBlue, Blue, Purple
.
Clock Hr
Hour adjustment
0 – 23 (1 – 12), [11]
[Initial: 0 (0:00)]
Clock Min
Minute adjustment
00 – 59, [11]
[Initial: 00 (0:00)]
24H/12H
Clock system
12Hours – 24Hours, [11]
[Initial: 24Hours]
CLK Adj
Automatic clock
adjustments
Auto: [Initial]; The built-in clock is automatically adjusted
using the clock time data in the RDS signal.
Off: Cancels.
Scroll*
1
Once: [Initial]; Scrolls the disc information once.
Auto:
Repeats scrolling (5-second intervals in between).
Off: Cancels.
• Even if “Scroll” is set to “Off”, you can scroll the display by
pressing D DISP for more than one second.
*
1
Some characters or symbols will not be shown (and will be blanked) on the monitor.
SOURCE
MENU
OK
OK
To Next Page
Loading...
Need help?
General
