ENGLISH
21
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the display and buttons illumination.
OFF
:Dimmer is turned off.
ON
:Dimmer is turned on. Brightness changes to [
NIGHT
] setting.
(
[
BRIGHTNESS
]
)
DIMMER TIME
:Set the dimmer on and off time.
1
Turn the volume knob to adjust the [
ON
] time, then press the knob.
2
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]: 18:00 or 6:00 PM
[
OFF
]: 6:00 or 6:00 AM)
AUTO
:Dimmer turns on and off automatically when you turn off or on the car
headlights. *
1
DISPLAY SETTINGS
BRIGHTNESS
Set the button and display brightness for day and night separately.
1
DAY
/
NIGHT
:Select day or night.
2
Select a zone.
( Illustration on left column)
3
Set the brightness level (
00
to
31
).
(Default:
BUTTON ZONE
:
DAY
:
25
;
NIGHT
:
09
DISP ZONE
:
DAY
:
31
;
NIGHT
:
12
)
SCROLL
*
2
ONCE
:Scrolls the display information once.;
AUTO
:Repeats scrolling at
5-second intervals.;
OFF
:Cancels.
COLOR
PRESET
Select a color for the buttons illumination.
•
COLOR 01
to
COLOR 49
[
COLOR 08
]
•
USER
: The color you have created for [
DAY COLOR
] or [
NIGHT COLOR
]
is shown.
•
COLOR FLOW01
to
COLOR FLOW03
: Color changes at different
speeds.
DAY COLOR
Make your own day and night colors for the buttons illumination.
1
RED
/
GREEN
/
BLUE
:Select a primary color.
2
00
to
31
:Select the level.
Repeat steps
1
and
2
for all primary colors.
• Your setting is stored to
[USER]
in
[PRESET]
.
NIGHT COLOR
MENU COLOR
ON
:Changes the button illumination in menu mode or when selecting a
music file from a folder/list.;
OFF
:Cancels.
[
NIGHT COLOR
] or [
DAY COLOR
] is changed by turning on or off your car’s
headlight.
*
1
The illumination control wire connection is required.
( 29)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
JS_JVC_KD_DB97BT_E_EN_1.indd 21JS_JVC_KD_DB97BT_E_EN_1.indd 21 12/11/2015 11:24:03 AM12/11/2015 11:24:03 AM
To Next Page
Loading...
