ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
To On the faceplate
While having two active calls...
End current call and activate
held call
Press and hold
or .
Swap between the current call
and held call
Press
.
Adjust the phone volume
*
1
[00]
to
[35]
(Default:
[15]
)
Press
during a call.
Switch between hands-free and
private talk modes
*
2
Press during a call.
*
1
This adjustment will not affect the volume of the other sources.
*
2
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Press to select an item
(
see the following table
)
, then press
.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
MIC GAIN LEVEL –10
to
LEVEL +10
(
LEVEL –04
): The sensitivity of the microphone increases
as the number increased.
NR LEVEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
): Adjust the noise reduction level until the least
noise is being heard during a phone conversation.
ECHO CANCEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
): Adjust the echo cancellation delay time until
the least echo is being heard during a phone conversation.
BLUETOOTH®
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Press to select an item
(
see the following table
)
,
then press
.
3
Repeat step 2 until the desired item is selected or activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC
to
30 SEC
:The unit answers incoming call automatically
in the selected time (in seconds).;
OFF
:Cancels.
RING COLOR COLOR 01
to
COLOR 49
(
COLOR 08
): Selects the illumination
color for the symbolic button as notification when there is an
incoming call and during a call.;
OFF
:Cancels.
JS_JVC_KD_DB98BT_E_EN_3.indd 13JS_JVC_KD_DB98BT_E_EN_3.indd 13 11/28/2016 12:14:40 PM11/28/2016 12:14:40 PM
To Next Page
Loading...
