EasyManua.ls Logo

JVC KD-DB98BT - Display Settings; Brightness and Dimmer; DTA Value Determination

JVC KD-DB98BT
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
23
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1
Determine the center of the currently set listening
position as the reference point.
2
Measure the distances from the reference point to
the speakers.
3
Calculate the differences between the distance
of the furthest speaker (rear speaker) and other
speakers.
4
Set the
[DISTANCE]
calculated in step
3
for
individual speakers.
5
Adjust
[GAIN]
for individual speakers.
Example: When
[FRONT ALL]
is selected as the
listening position
*
1
Before making an adjustment, select the speaker:
When 2-way crossover is selected:
FRONT LEFT
/
FRONT RIGHT
/
REAR LEFT
/
REAR RIGHT
/
SUBWOOFER
[REAR LEFT]
,
[REAR RIGHT]
and
[SUBWOOFER]
is selectable only if a setting other than
[NONE]
is selected for
[REAR]
or
[SUBWOOFER]
of
[SPEAKER SIZE]
.
( 21)
When 3-way crossover is selected:
TWEETER LEFT
/
TWEETER RIGHT
/
MID LEFT
/
MID RIGHT
/
WOOFER
[WOOFER]
is selectable only if a setting other than
[NONE]
is selected for
[WOOFER]
of
[SPEAKER SIZE]
.
( 22)
*
2
Displayed only when
[X ' OVER TYPE ]
is set to
[2-WAY]
( 19)
and if a setting other than
[NONE]
is selected for [
REAR
] of
[SPEAKER SIZE]
.
( 21)
DISPLAY SETTINGS
1 Press and hold .
2 Press to select an item (see the following table), then
press
.
3 Repeat step 2 until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the illumination.
OFF
:Dimmer is turned off. Brightness changes to
[DAY]
setting.
ON
:Dimmer is turned on. Brightness changes to
[NIGHT]
setting.
(
24
,
[BRIGHTNESS]
)
DIMMER TIME
:Set the dimmer on and off time.
1
Press to adjust the
[ON]
time, then press .
2
Press to adjust the
[OFF]
time, then press .
(Default:
[ON]
:
18:00
;
[OFF]
:
6:00
)
DIMMER AUTO
:Dimmer turns on and off automatically when you turn off
or on the car headlights.
*
1
*
1
The illumination control wire connection is required.
( 30)
Symbolic button
JS_JVC_KD_DB98BT_E_EN_3.indd 23JS_JVC_KD_DB98BT_E_EN_3.indd 23 11/28/2016 12:15:15 PM11/28/2016 12:15:15 PM

Related product manuals