ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth mode settings
1
Press and hold .
2 Press to select an item
(
see the following table
)
, then press .
3 Repeat step 2 until the desired item is selected/activated or follow the instructions
stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
BT MODE
PHONE SELECT
* Selects the phone or audio device to connect or disconnect.
“
” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
AUDIO SELECT
*
DEVICE DELETE
1
Press to select a device to delete, then press .
2
Press to select
[YES]
or
[NO]
, then press .
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Press to select a number.
2
Press to move the entry position.
Repeat steps
1
and
2
until you finish entering the PIN code.
3
Press to confirm.
RECONNECT ON
:The unit automatically reconnect when the last connected Bluetooth device is within
range.;
OFF
:Cancels.
AUTO PAIRING ON
:The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android
device) when it is connected through USB input terminal.Depending on the operating
system of the connected device, this function may not work. ;
OFF
:Cancels.
INITIALIZE YES
:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;
NO
:Cancels.
INFORMATION MY
BT
NAME
: Displays the unit name (“KD-DB9 BT”).;
MY
ADDRESS
: Shows address of this unit.
*
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“BLUETOOTH”
“CHECK MODE” appears. “SEARCH
NOW USING PHONE”
“PIN IS 0000” scrolls on the
display.
2 Search and select “KD-DB9 BT” on the Bluetooth
device within 3minutes.
3 Perform (A), (B) or (C) depending on what appears
on the display.
(A) “PAIRING”
“XXXXXX” (6-digit passkey): Ensure
that the same passkey appears on the unit and
Bluetooth device, then operate the Bluetooth
device to confirm the passkey.
(B) “PAIRING”
“PIN IS 0000”: Enter “0000” on the
Bluetooth device.
(C) “PAIRING”: Operate the Bluetooth device to
confirm pairing.
After pairing is successful, “PAIRING OK”
“[Device
Name]” appears and Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the
Bluetooth device to allow phonebook access to continue.
“TESTING” flashes on the display.
BLUETOOTH®
JS_JVC_KD_DB98BT_E_EN_3.indd 15JS_JVC_KD_DB98BT_E_EN_3.indd 15 11/28/2016 12:14:51 PM11/28/2016 12:14:51 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
