JVC KD-DV4200 - DVD Player With Radio User Manual

36
Problem Causes/Remedies
D. player
D. player does not turn on, or
does not work.
¶ Firmware version needs to be updated.
= Update fi rmware version of D. player.
D. player does not turn on. ¶ Battery of D. player has run out.
= Charge the battery of D. player.
Buttons do not work as
intended.
¶ The functions of the buttons have been changed.
= Press MODE before performing the operation.
Sound is distorted. ¶ Equalizer is activated on D. player.
= Deactivate equalizer on D. player.
No sound is played. (“Not
Connected” appears on
display of D. player.)
¶ Connections are incorrect, or communication failure
occurs between adapter and D. player.
= Disconnect adapter from D. player. Then, connect it again.
“ERROR 01” appears on
display.
“NO DP” appears on display. ¶ Connections are incorrect.
= Check the connecting cable and its connection.
“NO TRACK” appears on
display.
¶ No tracks are stored in D. player.
= Import tracks to D. player.
“RESET 1”−”RESET 7”
appears on display.
¶ Communication failure occurs between adapter and
D. player/unit.
= Disconnect adapter both from unit and D. player. Then,
connect it again.
“RESET 8” appears on
display.
¶ Communication failure occurs between adapter and unit.
= Check the connection between adapter and unit.
D. player’s controls do not
work after disconnecting from
adapter.
¶ Communication failure occurs between adapter and
D. player.
= Reset D. player.
= Remove panel and reset unit.
\
¶ Your preset adjustments will also be
erased.
= Forcibly eject the disc.
+
(Hold)
Troubleshooting
None of the buttons work properly! My disc will not eject!
EN_KD-DV4200[J]_f.indd 36EN_KD-DV4200[J]_f.indd 36 12/19/05 9:58:05 AM12/19/05 9:58:05 AM

JVC KD-DV4200 - DVD Player With Radio Specifications

General

Brand	JVC
Model	KD-DV4200 - DVD Player With Radio
Category	Car Receiver
Language	English