JVC KD-DV5100 User Manual

34
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
*
1
Only for KD-ADV6160
Ex.: When “FAD” is selected
2
Indication pattern changes
as you adjust the level.
Indication To do: Range
FAD*
2
(fader)
Adjust the front
and rear speaker
balance.
R06
(Rear only)
to
F06
(Front only)
BAL
(balance)
Adjust the left
and right speaker
balance.
L06
(Left only)
to
R06
(Right only)
LOUD
(loudness)
Boost low and
high frequencies
to produce a well-
balanced sound at
low volume level.
LOUD ON
J
LOUD OFF
SUB. W*
3
(subwoofer)
Adjust the
subwoofer output
level.
00 (min.)
to
08 (max.)
VOL. A*
4
(volume
adjust)
Adjust and store
the volume level
of each source.
–05 (min.)
to
+05 (max.)
VOL*
5
(volume)
Adjust the
volume.
00 (min.)
to
30 or 50
(max.)*
6
*
2
If you are using a two-speaker system, set
the fader level to “00.”
*
3
Only for KD-ADV6160: This takes effect
only when a subwoofer is connected.
*
4
You cannot make an adjustment if the source
is FM. “FIX” will appear.
*
5
Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*
6
Depending on the amplifier gain control
setting. (See page 37 for details.)
EN28-35_KD-ADV6160[J]f.indd 34EN28-35_KD-ADV6160[J]f.indd 34 12/15/04 12:09:19 PM12/15/04 12:09:19 PM

JVC KD-DV5100 Specifications

General

Brand	JVC
Model	KD-DV5100
Category	Car Stereo System
Language	English