35
ENGLISH
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items (except for SID) listed in the table that
follows.
1
2 Select a PSM item.
Ex.: When you select “DIMMER”
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
Indications Selectable settings, [reference page]
DEMO
Display demonstration
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [11].
DEMO OFF: Cancels.
CLOCK H
Hour adjustment
1 – 12, [11]
[Initial: 1 (1:00)]
CLOCK M
Minute adjustment
00 – 59, [11]
[Initial: 00 (1:00)]
CLK ADJ*
Automatic clock
adjustments
AUTO: [Initial]; The built-in clock is automatically adjusted
using the clock time data provided via the SIRIUS
®
radio
channel.
OFF: Cancels.
*
Displayed only when SIRIUS radio is connected.
To be continued...
EN28-35_KD-ADV6160[J]f.indd 35EN28-35_KD-ADV6160[J]f.indd 35 12/14/04 2:25:51 PM12/14/04 2:25:51 PM
To Next Page
Loading...
