EasyManua.ls Logo

JVC KD-DV5506 - Page 38

JVC KD-DV5506
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Category Menu item Selectable setting, [reference page]
DISPLAY
TAG DISPLAY
Tag display
• TAG ON
• TAG OFF
: Shows the Tag information while playing MP3/WMA/WAV
tracks.
: Cancels.
VIDEO *
4
Video format
• PAL
• NTSC
: Select this if your monitor is of the PAL color system.
: Select this if your monitor is of the NTSC color system.
TUNER
MONO *
5
Monaural mode
• MONO ON
• MONO OFF
: Activate monaural mode to improve FM reception, but
stereo effect will be lost, [11].
: Restore the stereo effect.
IF BAND
Intermediate
frequency band
• AUTO
• WIDE
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect
will remain.
COLOR
COLOR 01
— COLOR 29,
USER
: Select one of the preset or user color for display and button (except EQ/
/0) illumination.
(For customized color settings, <USER>, see page 40.)
MENU
COLOR
• ON
• OFF
: Changes the display and button (except EQ/ /0) illumination during
menu, list search, and playback mode operations.
: Cancels.
RING COLOR *
6
• ON
• OFF
: When a call comes in, the display will flash in blue.
• The display will change to the original color when you answer the call or the
incoming call stops.
When the unit receive a text message, the display only illuminates in blue.
: Cancels.
AUDIO
FADER *
7
Fader
R06 – F06 : Adjust the front and rear speaker output balance.
(Initial: 00)
BALANCE
Balance
L06 – R06 : Adjust the left and right speaker output balance.
(Initial: 00)
LOUD
Loudness
• LOUD ON
• LOUD OFF
: Boost low and high frequencies to produce a well-balanced
sound at a low volume level.
: Cancels.
*
4
The newly selected video format takes effect only after you turn on the power again or change the source.
*
5
Displayed only when the source is “
FM
.”
*
6
Displayed only when Bluetooth adapter, KS-BTA200 is connected.
*
7
If you are using a two-speaker system, set the fader level to <00>.
EN36-45_KD-DV5506_001A_f.indd 38EN36-45_KD-DV5506_001A_f.indd 38 2/27/09 10:01:36 AM2/27/09 10:01:36 AM