15
Before performing any operations, make
sure the following....
• To watch the playback pictures, select the an
appropriate video system (NTSC or PAL) to
match it to the connected monitor. (See page
36.)
• Turn on the monitor to watch the playback
picture. If you turn on the monitor, you can
also control the audio CD, CD Text, and
MP3/WMA playback by referring to the
monitor screen. (See pages 24 and 25.)
• For DVD playback, you can change the Setup
Menu setting to your preference. (See pages
26 – 28.)
• The operations explained on pages 17 – 28 are
using the remote controller.
• When you want to operate the DVD/CD
player using the buttons on the control panel,
see “Other disc operations” on pages 29 – 31.
If “
” appears on the monitor when
pressing a button, the unit cannot accept an
operation you have tried to do.
• In some cases, without showing “
,”
operations will not be accepted.
The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, or VCD without PBC, all tracks
will be played repeatedly until you change the
source or eject the disc.
• If a title list or disc menu appears while
playing a DVD or VCD with PBC, see “Disc
menu operations” on page 20.
The following marks are used to indicate
the playable discs....
DVD Video Video CD with PBC
only
Video CD with/without
PBC
Audio CD/
CD Text
MP3/WMA disc All discs listed here
Disc operations
Playing a disc in the unit
Continued on the next page
EN08-15_DV6206_004A_f.indd 15EN08-15_DV6206_004A_f.indd 15 2/24/06 10:49:53 AM2/24/06 10:49:53 AM
To Next Page
Loading...
Need help?
General
