44
More about this unit
Basic operations
Turning on the power
• By pressing SOURCE on the unit, you can
also turn on the power. If the source is ready,
playback also starts.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start automatically, next
time you turn on the power.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, the
previously preset station is erased when a new
station is stored in the same preset number.
Disc operations
General
• In this manual, words “track” and “file” are
interchangeably used when referring to MP3/
WMA files and their file names.
• This unit can also playback 8 cm discs.
• This unit can only playback audio CD
(CD-DA) files if different type of files are
recorded in the same disc.
Inserting a disc
• When a disc is inserted upside down,
“PLEASE” and “EJECT” appear alternately
on the display. Press 0 to eject the disc.
Playing a DVD-R/-RW, +R/+RW or
CD-R/-RW
• Use only “finalized” discs.
• This unit can play back only the files of the
same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• Only for CD-R/-RW: This unit can play
back multi-session discs; however, unclosed
sessions will be skipped while playing.
• Some DVD-R/-RW, +R/+RW or CD-R/-RW
may not play back on this unit because
of their disc characteristics, and for the
following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the unit.
– The pickup lens inside the unit is dirty.
– CD-R/-RW on which the files are written
with “Packet Write” method.
– DVD-R/-RW, +R/+RW which are not
written in UDF-Bridge Format (eg. UDF
format or ISO format).
– There are improper recording conditions
(missing data, etc.) or media conditions
(stained, scratched, warped, etc.).
• DVD-RW/+RW/CD-RW may require a
longer readout time since the reflectance of
these discs is lower than that of regular discs.
• Do not use the following DVD-R/-RW,
+R/+RW, or CD-R/-RW:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to the unit.
EN40-45_DV6206_004A_f.indd 44EN40-45_DV6206_004A_f.indd 44 3/2/06 9:00:35 AM3/2/06 9:00:35 AM
To Next Page
Loading...
Need help?
General
