8
Remote controller — RM-RK230
Installing the lithium coin battery
(CR2025)
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no
obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Remote sensor
Main elements and features
IMPORTANT:
If Dual Zone is activated (see page 32),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1 Monitor control buttons
• Used for a JVC monitor—KV-MR9010
or KV-MH6510.
DVD/RECEIVER CONTROL
2
(standby/on attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
• Turns the power off if pressed and held.
3 SOURCE button
• Selects the source.
EN08-15_DV6206_004A_f.indd 8EN08-15_DV6206_004A_f.indd 8 2/24/06 10:49:50 AM2/24/06 10:49:50 AM
To Next Page
