28
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear. For details, see page 47.
• PCM ONLY :
Select this when connecting an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or connecting to a
recording device.
• DOLBY DIGITAL/PCM :
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital.
• STREAM/PCM :
Select this when connecting an amplifier or a decoder compatible
with Dolby Digital, DTS, and MPEG Audio.
DOWN MIX
When playing back a multi-channel DVD disc, this setting affects
the signals reproduced through the LINE OUT jacks (and through
the DIGITAL OUT terminal when “PCM ONLY” is selected for
“DIGITAL AUDIO OUTPUT”).
• DOLBY SURROUND :
Select this when you want to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby Surround to this
unit.
• STEREO : Normally select this.
D.RANGE COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while
playing a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON : Select this to always use this function.
EN28-33_DV6206_004A_f.indd 28EN28-33_DV6206_004A_f.indd 28 2/24/06 10:50:45 AM2/24/06 10:50:45 AM
To Next Page
Loading...
Need help?
General
