To Next Page

To Previous Page

ENGLISH

To stop play and eject the disc

• Press SOURCE to listen to another playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same

procedure.

Disc operations

Before performing any operations...

Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other

discs by referring to the monitor screen. (See pages 22 – 25.)

The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its

internal program).

If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or

eject the disc.

If “

” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to

do.

• In some cases, without showing “ ,” operations will not be accepted.

Open the control panel.

Make sure to detach the USB device before opening the control

panel, as it might block the opening mechanism.

• To detach the USB device, see page 26.

Insert the disc.

Playback starts automatically.

Start playback if necessary.

EN10-19_KD-DV7402_001A_f.indd 16EN10-19_KD-DV7402_001A_f.indd 16 2/20/08 12:16:08 PM2/20/08 12:16:08 PM

Downloaded from Caradio-Manual.com Manuals

Questions and Answers:

Need help?

Do you have a question about the JVC KD-DV7402 and is the answer not in the manual?

JVC KD-DV7402 Specifications

General