25
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 19.
1
Select the external component
(LINE IN).
• If “LINE IN” does not appear on the display, see
page 19 and select the external input (“LINE IN”).
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press to turn
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want. (See
pages 16 and 17.)
CD LINE IN
EN25-25_KD-G255[U]f.p65 12/24/03, 12:41 PM25
To Next Page
Loading...
Need help?
General
