How to stop noise interfering with sounds in my JVC Car Receiver?
To minimize noise interference with the sounds in your JVC Car Receiver, ensure the rear ground terminal is connected to the car’s chassis using shorter and thicker cords.
Why does my JVC Car Receiver unit become hot?
Your JVC Car Receiver might be overheating if the speaker output lead is grounded or if the “–” terminals of the left and right speakers are grounded in common. Inspect these connections to ensure they are properly configured.
How to fix JVC Car Receiver when disc cannot be played back?
If your JVC Car Receiver is unable to play a disc, make sure that you insert the disc correctly.
What to do if JVC Car Receiver does not work?
If your JVC Car Receiver is not working at all, reset the unit.
How to fix JVC KD-G343 Car Receiver when no sound from speakers?
If you can't hear any sound from the speakers of your JVC Car Receiver, first, adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
What to do if my JVC Car Receiver does not work at all?
If your JVC Car Receiver isn't working, try resetting the unit. This might resolve the issue.
Why power cannot be turned on in my JVC KD-G343?
If your JVC Car Receiver is not turning on, check if the yellow lead is connected. This connection is necessary for the unit to power up.
What to do if there is no sound from the speakers of my JVC KD-G343 Car Receiver?
If you're not getting any sound from the speakers of your JVC Car Receiver, check if the speaker output lead is short-circuited. This could be the reason for the lack of audio.
Unit is classified as a Class 1 Laser Product.
Do not open the top cover; no user-serviceable parts inside.
Caution: visible/invisible Class 1M laser radiation when open.
Instructions on how to reset the unit's settings.
Procedure for forcibly ejecting a disc.
Identification of buttons, indicators, and connectors on the control panel.
Initial unit operations like power on/off and source selection.
Procedures for storing radio stations manually or automatically.
Explains features available through RDS data reception.
How to find programs based on Programme Type (PTY) codes.
Allows switching to Traffic Announcements (TA) from other sources.
Automatically tunes to stronger stations of the same network.
Instructions for playing CDs, CD-Rs, CD-RWs, MP3, and WMA discs.
Selectable preset equalizer modes for different music genres.
Requirements and limitations for playing MP3/WMA discs.
Common issues like no sound or unit not working.
Issues specific to MP3/WMA disc playback and character display.
Issues related to radio reception and SSM preset.
Problems with disc playback, ejection, and interruptions.
General| MP3 playback | Yes |
|---|---|
| AM band range | 522 - 1620 kHz |
| FM band range | 87.5 - 108 MHz |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Ready for iPod | No |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| Display type | LCD |
| I/O ports | 1 x RCA 1 x Aux-in |
Weight and Dimensions| Dimensions (WxDxH) | 182 x 159.5 x 52 mm |
|---|
To Next Page
