J
Jennifer CardenasAug 29, 2025
What to do if there is no 4V at both sides of the feed motor in JVC Other?
- LLisa VargasAug 29, 2025
If there is no 4V present at both sides of the feed motor, check the feed motor.
To Next PageTo Next PageWhat to do if there is no 4V at both sides of the feed motor in JVC Other?
If there is no 4V present at both sides of the feed motor, check the feed motor.
What to do if there is no 5V at IC501 pin 20 on my JVC Other?
If there is no 5V present at IC501 pin 20, check IC501.
Why does my JVC KD-G401 Car Receiver CD automatically eject?
If your JVC Car Receiver ejects CDs automatically, it might be because the CD is inserted upside down. Make sure to insert the CD correctly.
What to do if 'NO DISC' appears on JVC Car Receiver display?
If your JVC Car Receiver displays “NO DISC”, ensure that a CD is properly inserted into the loading slot. If a CD is already inserted, make sure it's inserted correctly.
How to fix no sound from JVC KD-G401 Car Receiver speakers?
If you're not getting any sound from the speakers of your JVC Car Receiver, first, make sure the volume isn't set too low; adjust it to a higher, more audible level. Also, verify that all the cords and connections are correctly and securely connected.
Audio Amplifier| maximum power output (front) | 50 W per channel |
|---|---|
| maximum power output (rear) | 50 W per channel |
| continuous power output (RMS) (front) | 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion |
| continuous power output (RMS) (rear) | 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion |
| load impedance | 4 Ω (4 Ω to 8 Ω allowance) |
| tone control range (bass) | ±10 dB at 100 Hz |
| tone control range (treble) | ±10 dB at 10 kHz |
| frequency response | 40 Hz to 20 000 Hz |
| signal-to-noise ratio | 70 dB |
| line-out level/impedance | 2.0 V/20 kΩ load (full scale) |
| output impedance | 1 kΩ |
CD Player| operating voltage | DC 14.4 V (11 V to 16 V allowance) |
|---|---|
| allowable operating temperature | 0°C to +40°C |
| dimensions (W × H × D) | 182 mm × 52 mm × 150 mm |
| panel size | 188 mm × 58 mm × 11 mm |
| mass | 1.3 kg (excluding accessories) |
| frequency response | 5 Hz to 20 000 Hz |
| dynamic range | 96 dB |
| signal-to-noise ratio | 98 dB |
| max. bit rate | 320 Kbps |
Tuner| frequency range (FM) | 87.5 MHz to 108.0 MHz |
|---|---|
| frequency range (AM MW) | 522 kHz to 1 620 kHz |
| frequency range (AM LW) | 144 kHz to 279 kHz |
| usable sensitivity | 11.3 dBf (1.0 µV/75 Ω) |
| 50 dB quieting sensitivity | 16.3 dBf (1.8 µV/75 Ω) |
| alternate channel selectivity (400 kHz) | 65 dB |
| frequency response | 40 Hz to 15 000 Hz |
| stereo separation | 30 dB |
| capture ratio | 1.5 dB |
| sensitivity (MW) | 20 µV |
| selectivity (MW) | 35 dB |
| sensitivity (LW) | 50 µV |
Warns about laser radiation, internal non-serviceable parts, and direct beam exposure.
Refers to the caution label placed outside the unit.
Identifies buttons and indicators on the main unit's control panel.
Explains the various indicators shown on the unit's display.
Instructions for powering the unit on and off.
How to choose between FM/AM tuner and CD player sources.
Steps to increase or decrease the audio volume level.
Procedure to disable the unit's display demonstration feature.
How to set the clock system to 12 or 24-hour format.
Basic steps for tuning into radio stations.
Instructions for automatically finding radio stations.
How to manually tune into specific radio stations.
Methods for saving radio stations for quick access.
How to recall stored radio stations using preset numbers.
Explains what RDS can do, like station names and program types.
How the unit automatically tunes to stronger signals for continuous reception.
Allows switching to traffic announcements from other sources.
Switches to favorite program types during playback.
How to search for programs by PTY code and store them.
Covers automatic station selection, TA volume, and clock adjustment.
Instructions for inserting and playing a standard CD.
How to stop CD playback and eject the disc.
Fast-forwarding, reversing, and skipping tracks on a CD.
Options for Disc Random Play and Track Repeat Play.
How to view text information recorded on a CD Text disc.
How to lock a CD in the loading slot to prevent ejection.
Explains the MP3 audio file format and its compression.
Details compatibility with ID3 Tag and file formats.
How MP3 files and folders are structured and played back.
Instructions for inserting and playing MP3 discs.
How to stop MP3 playback and eject the disc.
How to switch between tag, file name, and elapsed time displays.
Fast-forwarding, reversing, and skipping files on an MP3 disc.
How to quickly select files and folders on an MP3 disc.
How to move to the next or previous folder on an MP3 disc.
Options for Folder Random, Disc Random, Track Repeat, and Folder Repeat.
How to choose equalizer modes like ROCK, POP, JAZZ.
Detailed steps for fine-tuning sound characteristics.
Adjusts display brightness for night viewing.
Mutes audio when a cellular phone is connected.
Controls how text information scrolls on the display.
Controls the display of MP3 ID3 tag information.
Adjusts maximum volume output to match speaker power.
How to safely remove the control panel from the unit.
How to reattach the control panel to the unit.
Instructions for inserting and replacing the battery in the remote controller.
Identifies the functions of each button on the remote controller.
Common issues like no sound or unit not working.
Issues related to radio reception and presets.
Problems encountered during CD playback, including errors and skipping.
Issues specific to playing MP3 files, like noise or incorrect characters.
Proper care and handling of CDs, CD-Rs, CD-RWs, and MP3 discs.
