ENGLISH
17
In Channel Search, channel name and channel
number appear on the display during search.
• While searching, invalid and unsubscribed channels
are skipped.
Checking the XM Satellite radio ID
While selecting “XM1,” “XM2,” or “XM3,” select
“Channel 0.”
The display alternately shows “RADIO ID” and the
8-digit (alphanumeric) ID number.
To cancel the ID number display, select any channel
other than “Channel 0.”
Storing channels in memory
You can preset six channels for each band.
Ex.: Storing a channel into preset number 4.
1 Tune in to a channel you want.
2
Listening to a preset channel
1 Select either SIRIUS Satellite radio or XM
Satellite radio.
2
Listening to the XM Satellite radio
1
2
3 Select a channel for listening.
Holding the button changes the channels rapidly.
Searching for category/channel
You can search for programs by category (Category
Search) or channel number (Channel Search).
• In Category Search, you can tune in to the channels
of the selected category. Category Search begins from
the currently selected channel. The selected channel
number flashes on the display.
• In Channel Search, you can tune in to all channels
(including non-categorised channels).
1 Select a category (Category Search).
• For Channel Search, skip this
step.
2 Select a channel for listening.
If no operation is done for about 15 seconds,
Category Search is canceled.
Current channel number
Ex.: When you select “COUNTRY” for Category Search
Preset number flashes for a while.
Continued on the next page
EN12-19KD-AR480_430[J]f.indd 17EN12-19KD-AR480_430[J]f.indd 17 11/20/06 5:14:01 PM11/20/06 5:14:01 PM
To Next Page
Loading...
Need help?
General
