55
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
For KD-LH3150:
You can connect an external components to the
LINE IN plugs on the rear.
For KD-LH3100:
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component, change
the “Ext Input” setting to “Line In.” (See page 42.)
1
Select the external component
(LINE-IN).
Each time you press the button, the source
changes as described on page 7.
Note on One-Touch Operation:
When you press CD/CD-CH (LINE) (for KD-
LH3150) or CD/CD-CH (for KD-LH3100), the
power automatically comes on. You do not have
to press to turn on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 28 – 31.)
(For KD-LH3150) (For KD-LH3100)
EN55-55_KD-LH3150_3100[J]f.p65 2/21/03, 10:03 AM55
To Next Page
Loading...
