JVC KD-R300

• MSG INFO (message info)
Only for the device being connected for "BT -PHONE."
AUTOMATIC: The unit informs you of the arrival of
a message by ringing and displaying
"RCV MESSAGE" (receiving message).
• The display illuminate in blue (see
"RING COLOR" on page 24).
MANUAL: The unit does not inform you of the
arrival of a message.
• VERSION
The Bluetooth software and hardware versions are
shown.
• MIC SEnlNG (microphone setting)
Only for the device being connected for "BT -PHONE."
Adjust microphone volume connected to the Bluetooth
adapter, [LEVEL 01/02/03].
Setting menu (_: Initial)
• AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with ...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth device
found at first.
1/1 AUTO ANSWER
Only for the device being connected for "BT -PHONE."
ON: The unit answers the incoming calls
a utomatica Ily.
OFF: The unit does not answer the calls
automatically. Answer the calls manually.
REJECT: The unit rejects all incoming calls.
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
*3 Bluetooth Audio: Shows only "Version."
r-- AUTO CNNCT .. ~ AUTO ANSWER*' ~
L.- VERSION*3 -- MIC SETTING*l -- MSG INFO*2-1
Bluetooth settings
5 Change the setting accordingly.
4 Select a setting item.
3 Select "SEnINGS."
You can change the settings listed on the right column
according to your preference.
1 Select "BT ·PHONE" or "BT ·AUDIO:'
SRC .... '
2 Enter the Bluetooth menu.
22