To Next PageTo Next PageWhat to do if my JVC Car Receiver displays 'PLEASE' and 'EJECT' alternately?
If your JVC Car Receiver is showing “PLEASE” and “EJECT” alternately on the display, press the 0 button, and then insert the disc correctly.
What to do if my JVC Car Stereo System displays 'MISWIRING CHK WIRING THEN RESET UNIT'?
If your JVC Car Stereo System displays the message “MISWIRING CHK WIRING THEN RESET UNIT”, check that the terminals of the speaker leads are properly covered with insulating tape. Then, reset the unit. If the message persists, it's recommended to consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.
What to do if my JVC Car Stereo System does not work at all?
If your JVC Car Stereo System is not working at all, try resetting the unit.
Why won't my JVC Car Receiver play the disc?
If your JVC Car Receiver is unable to play a disc, ensure that you are using a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. Additionally, add the extension code or to the file names.
Why is my JVC KD-R321 Car Receiver interrupting sound while playing a disc?
If the sound from your JVC Car Receiver is sometimes interrupted while playing a disc, consider these potential solutions: * Stop playback while driving on rough roads. * Try changing the disc. * Check the cords and connections.
Why can't I select 'F-AUX' or 'R-AUX' on my JVC KD-R321 Car Receiver?
If “F-AUX” or “R-AUX” cannot be selected on your JVC Car Receiver, check the = setting.
Why is sound sometimes interrupted when using auxiliary input on my JVC Car Stereo System?
If the sound is sometimes interrupted while listening to an external component connected to the auxiliary input jack on your JVC Car Stereo System, check to be sure the recommended stereo mini plug is used for connection.
Why does 'READING' keep flashing on the display of my JVC Car Stereo System?
If “READING” keeps flashing on the display of your JVC Car Stereo System, it means a longer readout time is required. Avoid using too many hierarchical levels and folders.
Why are the characters wrong on my JVC Car Receiver display?
If the correct characters are not displayed (e.g. album name) on your JVC Car Receiver, this unit can only display letters (upper case), numbers, and a limited number of symbols.
Why is there static noise while listening to the radio on my JVC Car Stereo System?
If you are experiencing static noise while listening to the radio, make sure that the aerial is firmly connected.
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | MP3, WMA |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Ready for iPod | - |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| I/O ports | 2 AUX In |
Identifies the unit as a Class 1 laser product.
Warns against opening the unit and viewing laser radiation directly.
Shows the placement and content of the external caution label.
Explains the correct procedure for disposing of the product and batteries in the EU.
Instructions for removing and installing the detachable control panel.
How to reset the unit, which also erases preset adjustments.
Procedure to eject a disc if it doesn't eject normally.
Guidelines for handling discs to ensure proper playback and prevent damage.
Explains the functions of various buttons and the control dial for basic operation.
Tips to enhance the quality of FM stereo reception.
How to manually store favorite radio stations.
How to recall stored radio stations using preset buttons.
How to change displayed information for non-RDS stations.
How to search for stations broadcasting specific programme types (PTY codes).
How to activate reception for Traffic Announcement (TA) signals.
How to activate reception for news programmes automatically.
Automatically tunes to stronger signals of the same network programme.
Automatically selects a better frequency for preset stations if signal is weak.
How to cycle through display information like station name, PTY, clock.
How to stop playback and eject a disc.
Navigating through tracks and folders on a disc.
How to cycle through disc playback information.
Options for repeat and random playback settings.
Summary of connecting portable audio players and Bluetooth devices via front/rear jacks.
Steps to select and play audio from connected external devices.
How to save personalized EQ and tone settings as a custom mode.
Solutions for common problems like no sound, unit not working, or input selection issues.
Solutions for radio reception issues like static or inability to select stations.
Solutions for disc errors, unplayable discs, and playback interruptions.
Solutions for problems with MP3/WMA files, playback order, and character display.
Steps to register (pair) a Bluetooth device with the adapter.
How to receive, make, and manage calls using the Bluetooth phone.
How to play audio from a connected Bluetooth device.
Technical details for the audio amplifier section.
Technical details for the radio tuner section.
Technical details for the CD player section.
Power requirements, operating temperature, dimensions, and mass.
Instructions for cleaning the exterior of the unit.
Instructions for cleaning the unit and panel connectors.
