What does 'IN DISC' mean on my JVC Car Receiver display?
If “IN DISC” appears on the display of your JVC Car Receiver, the disc cannot be ejected properly. Make sure nothing is blocking the loading slot.
Why does 'READING' keep flashing on my JVC Car Receiver display?
If “READING” keeps flashing on the display of your JVC Car Receiver, it means a longer readout time is required. Do not use too many hierarchical levels and folders.
Why don't tracks play in order on my JVC Car Receiver?
If tracks do not play back in the order you have intended them to play on your JVC Car Receiver, note that the playback order is determined when the files are recorded.
Why is the playing time incorrect on my JVC Car Receiver?
If the elapsed playing time is not correct on your JVC Car Receiver, this sometimes occurs during playback and is caused by how the tracks are recorded on the disc.
Why can't my JVC Car Stereo System play CD-R/CD-RW or skip tracks?
If your JVC Car Stereo System cannot play CD-R/CD-RW discs or skip tracks, make sure you are using a finalized CD-R/CD-RW. Finalize the disc with the component you used for recording.
What to do if my JVC Car Stereo System displays 'MISWIRING CHK WIRING THEN RESET UNIT'?
If your JVC Car Stereo System displays the message “MISWIRING CHK WIRING THEN RESET UNIT”, check that the terminals of the speaker leads are properly covered with insulating tape. Then, reset the unit. If the message persists, it's recommended to consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.
What to do if my JVC Car Stereo System does not work at all?
If your JVC Car Stereo System is not working at all, try resetting the unit.
Why is there no sound coming from my JVC KD-R321 Car Receiver speakers?
If you cannot hear sound from the speakers of your JVC Car Receiver, there might be a few reasons. First, ensure that the volume is appropriately adjusted. Also, verify that the unit is not muted or paused. Finally, check all cords and connections to ensure they are properly connected.
How to fix no sound from JVC Car Receiver speakers?
If you cannot hear sound from the speakers of your JVC Car Receiver, there are a few things you can check. First, make sure that the volume is at an audible level. Second, verify that the unit is not muted or paused. Finally, inspect the cords and connections to ensure they are properly connected.
What to do if my JVC Car Receiver does not work?
If your JVC Car Receiver is not working at all, try resetting the unit.
Identifies the unit as a Class 1 laser product.
Warns against opening the unit and viewing laser radiation directly.
Shows the placement and content of the external caution label.
Explains the correct procedure for disposing of the product and batteries in the EU.
Instructions for removing and installing the detachable control panel.
How to reset the unit, which also erases preset adjustments.
Procedure to eject a disc if it doesn't eject normally.
Guidelines for handling discs to ensure proper playback and prevent damage.
Explains the functions of various buttons and the control dial for basic operation.
Tips to enhance the quality of FM stereo reception.
How to manually store favorite radio stations.
How to recall stored radio stations using preset buttons.
How to change displayed information for non-RDS stations.
How to search for stations broadcasting specific programme types (PTY codes).
How to activate reception for Traffic Announcement (TA) signals.
How to activate reception for news programmes automatically.
Automatically tunes to stronger signals of the same network programme.
Automatically selects a better frequency for preset stations if signal is weak.
How to cycle through display information like station name, PTY, clock.
How to stop playback and eject a disc.
Navigating through tracks and folders on a disc.
How to cycle through disc playback information.
Options for repeat and random playback settings.
Summary of connecting portable audio players and Bluetooth devices via front/rear jacks.
Steps to select and play audio from connected external devices.
How to save personalized EQ and tone settings as a custom mode.
Solutions for common problems like no sound, unit not working, or input selection issues.
Solutions for radio reception issues like static or inability to select stations.
Solutions for disc errors, unplayable discs, and playback interruptions.
Solutions for problems with MP3/WMA files, playback order, and character display.
Steps to register (pair) a Bluetooth device with the adapter.
How to receive, make, and manage calls using the Bluetooth phone.
How to play audio from a connected Bluetooth device.
Technical details for the audio amplifier section.
Technical details for the radio tuner section.
Technical details for the CD player section.
Power requirements, operating temperature, dimensions, and mass.
Instructions for cleaning the exterior of the unit.
Instructions for cleaning the unit and panel connectors.
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | MP3, WMA |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Ready for iPod | - |
| Audio output channels | 4.0 channels |
| Maximum power per channel | 50 W |
| I/O ports | 2 AUX In |
To Next Page
