EasyManuals Logo
Home>JVC>Car Receiver>KD-R511

JVC KD-R511 User Manual

JVC KD-R511
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25ENGLISH
Symptom Remedy/Cause
MP3/WMA playback
The elapsed playing time is not
correct.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc.
“NO FILE” appears on the
display.
Selected folder is an empty folder *. Select another
folder that contains MP3/WMA tracks.
“NOT SUPPORT” appears on the
display and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
The correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
USB device playback
Noise is generated. The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
“READING” keeps flashing on
the display.
Readout time varies depending on the USB device.
Do not use too many hierarchy or folders.
Turn off the power then on again.
Reattach the USB device again.
“NO FILE” appears on the
display.
Selected folder is an empty folder *. Select another
folder that contains MP3/WMA tracks.
“NOT SUPPORT” appears on the
display and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
Tracks/folders are not played
back in the order you have
intended.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device
will be the first track/folder for playback.
“CANNOT PLAY” flashes on
the display.
“NO USB” appears on the
display.
The unit cannot detect the
USB device.
Attach a USB device that contains tracks encoded in
an appropriate format.
Reattach the USB device again.
While playing a track, sound is
sometimes interrupted.
The MP3/WMA tracks have not been properly copied
into the USB device.
Copy MP3/WMA tracks again into the USB device, and
try again.
Correct characters are not
displayed (e.g. album name).
This unit can only display letters (upper case),
numbers, and a limited number of symbols.
*
Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
EN20-27_KD-R511_003A_1.indd 25EN20-27_KD-R511_003A_1.indd 25 10/28/09 10:09:03 AM10/28/09 10:09:03 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-R511 and is the answer not in the manual?

JVC KD-R511 Specifications

General IconGeneral
MP3 playbackYes
Tuner typeHS-IV
FM band range87.5 - 108 MHz
LW band range144 - 279 kHz
Output power200 W
Product colorBlack
Ready for iPodNo
Frequency range5 - 20000 Hz
Equalizer bands quantity3
Signal-to-Noise Ratio (SNR)98 dB
File typeMP3/WMA
Key illumination colorGreen
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)181.6 x 159.6 x 51.6 mm

Related product manuals