EasyManuals Logo
Home>JVC>Car Receiver>KD-R611

JVC KD-R611 Instructions For The Use And Care And Installation

JVC KD-R611
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32 ENGLISH
USB devices equipped with special functions
such as data security functions cannot be
used with the unit.
Do not use a USB device with 2 or more
partitions.
This unit may not recognized a USB device
connected through a USB card reader.
This unit may not play back files in a USB
device properly when using a USB extension
cord.
This unit cannot play back the following files:
MP3 files encoded in MP3i and MP3 PRO
format.
MP3 files encoded in an inappropriate
format.
MP3 files encoded with Layer 1/2.
WMA files encoded in lossless, professional,
and voice format.
WMA files which are not based upon
Windows Media® Audio.
Bluetooth operations
While driving, do not perform complicated
operation such as dialing the numbers, using
phone book, etc. When you perform these
operations, stop your car in a safe place.
Some Bluetooth devices may not be
connected to this unit depending on the
Bluetooth version of the device.
This unit may not work for some Bluetooth
devices.
Connecting condition may vary depending
on the circumstances around you.
When the unit is turned off, the device is
disconnected.
Playing MP3/WMA tracks from a USB
device
While playing from a USB device, the playback
order may differ from other players.
This unit may be unable to play back some
USB devices or some files due to their
characteristics or recording conditions.
Depending on the shape of the USB devices
and connection ports, some USB devices may
not be attached properly or the connection
might be loose.
Connect one USB mass storage class device to
the unit at a time. Do not use a USB hub.
If the connected USB device does not have
the correct files, “CANNOT PLAY” appears.
This unit can show Tag (Version 1.0, 1.1, 2.2,
2.3, or 2.4) for MP3 files and for WMA files.
This unit can play back MP3/WMA files
meeting the conditions below:
Bit rate of MP3/WMA: 32 kbps — 320 kbps
Sampling frequency of MP3:
32 kHz, 44.1 kHz, 48 kHz (for MPEG-1)
16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)
Sampling frequency of WMA:
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
This unit can play back MP3 files recorded in
VBR (variable bit rate).
The maximum number of characters for:
Folder names : 32 characters
File names : 32 characters
MP3 Tag : 64 characters
WMA Tag : 32 characters
This unit can recognize a total of 5 000 files,
255 folders (255 files per folder including
folder without unsupported files), and of 8
hierarchies.
This unit does not support SD card reader.
This unit cannot recognize a USB device
whose rating is other than 5 V and exceeds
500 mA.
EN32-41_KD-R611_003A_1.indd 32EN32-41_KD-R611_003A_1.indd 32 10/27/09 11:46:05 AM10/27/09 11:46:05 AM

Other manuals for JVC KD-R611

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-R611 and is the answer not in the manual?

JVC KD-R611 Specifications

General IconGeneral
MP3 playbackYes
Tuner typeHS-IV
FM band range87.5 - 108 MHz
LW band range144 - 279 kHz
Output power200 W
Product colorBlack
Frequency range5 - 20000 Hz
Equalizer bands quantity3
Signal-to-Noise Ratio (SNR)98 dB
File typeMP3/WMA
Key illumination colorRed
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)181.6 x 159.6 x 51.6 mm

Related product manuals