JVC KD-R618

Troubleshooting
--.-----,- ,----._.
Symptom
Remedy/Cause
Sound cannot be heard from the
• Adjust the volume to the optimum
level.
speakers.
• Make sure the unit is not muted/paused (~1J 6).
• Check the cords and connections.
"PROTECT" appears on the display
Check to be sure the terminals of the speaker leads
and no operations can be done. are covered with insulating tape properly, then
-
reset the unit (~~ 3).
['J
If "PROTECT" does not disappear, consult your JVC
Q)
c
Q)
car audio dealer or acompany supplying kits.
u
The unit does not work at all.
Reset the unit. (~ 3)
"AUX IN" cannot be selected.
Check the <SRC SELECT> -+ <AU X IN> setting.
(~28)
Nothing appear on the display.
Check the <USER> color settings. (~30)
SSM automatic presetting does Store stations manually
not
work.
:2
«
Static noise while listening to the Connect the antenna firmly.
-....--.
:2
LL
radio.
"AM" cannot be selected.
Check the <SRC SELECT> -+ <AM> setting. (~28)
Disc cannot be played back. Insert the disc correctly.
•
CD-R/CD-RW cannot be played
• Insert afinalized CD-R/CD-RW.
back.
• Finalize the CD-R/CD-RW with the component
.
Tracks on the CD-R/CD-RW
which you used for recording.
cannot
be skipped .
.:L.
u
Disc can neither be played back
• Unlock the disc. (~9)
rIJ
...0
>.
nor ejected.
· Eject the disc forcibly. (~3)
m
0..
u
Vi
Disc sound is sometimes
•
Stop playback while driving on rough roads.
0
interrupted.
•
Change the disc.
• Check the cords and connections.
"NO DISC appears on the display. Insert a playable disc into the loading slot.
"PLEASE" and "EJECT" appear Press ...,then insert a disc correctly.
alternately
on the display.
36 ENGLISH