3ENGLISH
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments will
also be erased.
How to forcibly eject a disc
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon
or soft cloth. Failure to observe this precaution
may result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.
JVC bears no responsibility for any loss of data
in an iPod/iPhone and/or USB mass storage
class device while using this System.
CONTENTS
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
3 Maintenance
4 Canceling the display
demonstration
4 Setting the clock
5 Preparing the remote controller
5 About discs
6 Basic operations
7 Listening to the radio
9 Listening to a disc
11 Listening to a USB device
12 Using Bluetooth ® devices
13 Connecting a Bluetooth device
14 Using a Bluetooth mobile phone
17 Using a Bluetooth audio player
18 Changing the Bluetooth settings
19 Listening to an iPod/iPhone
21 Listening to the other external
components
22 Selecting a preset sound mode
23 Menu operations
25 Troubleshooting
29 Specifications
Condensation : When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
Temperature inside the car : If you have
parked the car for a long time in hot or cold
weather, wait until the temperature in the car
becomes normal before operating the unit.
[Hold]
EN02-29_KD-R721BT_003A_2.indd 3EN02-29_KD-R721BT_003A_2.indd 3 12/29/10 8:52:42 AM12/29/10 8:52:42 AM
To Next Page
Loading...
Need help?
General
