JVC KD-R881BT

ENGLISH
14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 KD-R981BT / KD-R784BT / KD-R782BT :
Turn the volume knob to select an item ( see the
following table
) , then press the knob.
KD-R889BT / KD-R881BT :
Press to select an item ( see the following
table
) , then press .
3 Repeat step 2 until the desired item is selected or
activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC to 30 SEC :The unit answers incoming call
automatically in the selected time (in seconds).;
OFF :Cancels.
RING COLOR KD-R981BT / KD-R889BT / KD-R881BT :
COLOR 01 to COLOR 49 ( COLOR 08 ): Selects the
illumination color for the buttons or symbolic button
as notification when there is an incoming call and
during a call.;
OFF :Cancels.
RING ILLUMI KD-R784BT / KD-R782BT :
BLINK 01 to BLINK 05 ( BLINK 02 ): Selects the
blinking pattern for the buttons as notification when
there is an incoming call.;
OFF :Cancels.
Make a call
You can make a call from the call history, phonebook, or dialing the number. Call by voice
is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press again to switch to another
phone.
“(Second device name)” appears.
2 KD-R981BT / KD-R784BT / KD-R782BT : Turn the volume knob to select an item ( see the
following table
) , then press the knob.
KD-R889BT / KD-R881BT : Press to select an item ( see the following
table
) , then press .
3 Repeat step 2 until the desired item is selected/activated or follow the instructions
stated on the selected item.
To return to the previous setting item, press
.
RECENT CALL (Applicable only if the phone supports PBAP.)
1 Press the volume knob (for KD-R981BT / KD-R784BT / KD-R782BT ) or (for
KD-R889BT / KD-R881BT ) to select a name or a phone number.
• “<” indicates call received, “>“ indicates call made, “M” indicates call missed.
• “NO HISTORY” appears if there is no recorded call history or call number.
2 Press the volume knob (for KD-R981BT / KD-R784BT / KD-R782BT ) or (for
KD-R889BT / KD-R881BT ) to call.
PHONEBOOK (Applicable only if the phone supports PBAP.)
1 Press to select the desired letter (A to Z, 0to9, and OTHERS).
• “OTHERS” appears if the first character is other than Ato Z, 0 to 9.
KD-R981BT / KD-R784BT / KD-R782BT :
2 Turn the volume knob to select a name, then press the knob.
3 Turn the volume knob to select a phone number, then press the knob to call.
KD-R889BT / KD-R881BT :
2 Press to select a name, then press .
3 Press to select a phone number, then press to call.
• The phonebook of the connected phone is automatically transferred to the unit when pairing.
• This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”.)
BLUETOOTH®
JS_JVC_KD_R981_E_EN_5.indd 14JS_JVC_KD_R981_E_EN_5.indd 14 9/1/2016 2:06:30 PM9/1/2016 2:06:30 PM