JVC KD-S38 - User Manual

55 pages

Save Page as PDF

To Next Page

ENGLISH

ESPAÑOL

FRANÇAIS

GET0754-001A

[J]

EN, SP, FR

KD-S38/KD-S28

CD RECEIVER / RECEPTOR CON CD /

RÉCEPTEUR CD

For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,

consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information

for future reference.

Model No.

Serial No.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l’installation et les raccordements, se référer au manuel séparé.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Still having trouble??

USA ONLY

Call 1-800-252-5722

http://www.jvc.com

We can help you!

KD-S38:

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to

connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to

meet Apple performance standards. Apple is not responsible for the operation of this device or

its compliance with safety and regulatory standards. Please note that the use of this accessory

with iPod, or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in

the U.S. and other countries.

CoverRear_KD-S38_S28[J].indd 1-2CoverRear_KD-S38_S28[J].indd 1-2 5/18/11 5:04:02 PM5/18/11 5:04:02 PM

Main Page

Other manuals for JVC KD-S38

Installation & Connection Manual2 pages

Questions and Answers

S
Shelly BurnsSep 2, 2025
Why is my iPod not working with my JVC Car Receiver?
- R
  Randall LangSep 2, 2025
  If your iPod does not turn on or does not work with your JVC Car Receiver, check the connecting cable and its connection. Consider updating the firmware version of the iPod/iPhone, charging the battery, or resetting the iPod/iPhone. Also, verify that the setting is appropriate.
W
William MurphyAug 31, 2025
Why is the sound interrupted while playing a track on my JVC Car Receiver?
- Q
  qjacksonAug 31, 2025
  If the sound is sometimes interrupted while playing a track on your JVC Car Receiver, it may be because the tracks have not been properly copied onto the USB device. Try copying the tracks again and then try again.
D
Dana GomezAug 29, 2025
What to do if disc sound is interrupted on JVC KD-S38 Car Receiver?
- S
  Scott MorrisAug 29, 2025
  If the disc sound on your JVC Car Receiver is sometimes interrupted, stop playback while driving on rough roads. You can also try changing the disc or checking the cords and connections.
M
Michael MckinneyAug 28, 2025
Why does my JVC Car Receiver say “CANNOT PLAY” or “NO USB”?
- U
  uvasquezAug 28, 2025
  If your JVC Car Receiver displays “CANNOT PLAY”, “NO USB”, or cannot detect the USB device, check whether the connected USB device is compatible with the unit. You may also try reattaching the USB device.
M
Mrs. Kristy CastanedaAug 27, 2025
Why won't my JVC KD-S38 play CD-R/CD-RW and skip tracks?
- G
  George NelsonAug 27, 2025
  If your JVC Car Receiver cannot play CD-R/CD-RW discs or skip tracks, ensure you are using a finalized CD-R/CD-RW. Finalize the disc with the component you used for recording.
Z
zspencerAug 25, 2025
What to do if “NO DISC” appears on JVC KD-S38 Car Receiver display?
- M
  Michael MontesAug 25, 2025
  If “NO DISC” appears on the display of your JVC Car Receiver, insert a playable disc into the loading slot.
L
lauriepayneAug 22, 2025
What to do if “MISWIRING CHK WIRING THEN RESET UNIT” appears on JVC KD-S38 Car Receiver display?
- L
  lisajohnsonAug 23, 2025
  If the message “MISWIRING CHK WIRING THEN RESET UNIT” appears on the display of your JVC Car Receiver and no operations can be performed, check that the terminals of the speaker leads are properly covered with insulating tape. After checking the wiring, reset the unit.