JVC KD-T700BT

22
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
[STATUS] Shows the status of the selected device.
[IOS CONNECTED]: You are able to use the application
using the iPhone/iPod connected via Bluetooth or USB input
terminal.
[IOS NOT CONNECTED]: No IOS device is connected to use
the application.
[ANDROID CONNECTED]: You are able to use the application
using the Android smartphone connected via Bluetooth.
[ANDROID NOT CONNECTED]: No Android device is
connected to use the application.
Listen to iPhone/iPod via Bluetooth
You can listen to the songs on the iPhone/iPod via Bluetooth
on this unit.
Press B SRC repeatedly to select iPodBT.
• You can operate the iPod/iPhone in the same way as iPod/
iPhone via USB input terminal. (Page 7)
• If you plug in an iPhone/iPod to the USB input terminal
while listening to iPod BT source, the source automatically
changes to iPod USB. Press B SRC to select iPod BT if the
device is still connected via Bluetooth.
BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s operations from
the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via
Bluetooth).
Preparation:
Install the latest version of JVC Remote application on your device before connecting. For
more information, visit <http://www.jvc.net/cs/car/>.
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then press the
knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[REMOTE APP]
[SELECT] Selects the device (IOS or ANDROID) to use the application.
[IOS]
[YES]: Selects iPhone/iPod to use the application via Bluetooth or connected via USB input terminal. ;
[NO]: Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input
terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via the USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID]
[YES]: Selects Android smartphone to use the application via Bluetooth. ; [NO]: Cancels.
[ANDROID
LIST]*
Selects the Android smartphone to use from the list.
* Displayed only when [ANDROID] of [SELECT] is set to [YES].
JS_JVC_KD_T905BTS_K_EN_08.indd 22JS_JVC_KD_T905BTS_K_EN_08.indd 22 6/4/2018 11:36:03 AM6/4/2018 11:36:03 AM