EasyManua.ls Logo

JVC KD-T700BT

JVC KD-T700BT
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
31
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DISPLAY SETTINGS
[COLOR] (for KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS)
[PRESET] Selects illumination colors for the buttons on different zones separately.
1
Select a zone ([ZONE1], [ZONE2], [ALLZONE]). (See the illustration on
page 30.)
2
Select a color for the selected zone.
[COLOR01] to [COLOR49]
[USER]: The color you have created for [DAYCOLOR] or
[NIGHTCOLOR] is shown.
[COLORFLOW01] to [COLORFLOW03]: Color changes at different
speeds.
[CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/[RELAX]/
[SUNSET]: The selected color pattern is shown.*4 (Selectable only
when [ALLZONE] is selected in step 1.)
[DAYCOLOR] Stores your own day and night illumination colors for different zones.
1
Select a zone ([ZONE1], [ZONE2]). (See the illustration on page 30.)
2
[RED]/[GREEN]/[BLUE]: Select a primary color.
3
[00] to [31]: Select the level.
Repeat steps 2 and 3 for all the primary colors.
Your setting is stored to [USER] in [PRESET].
[NIGHTCOLOR] or [DAYCOLOR] is changed by turning on or off your
car’s headlights.
[NIGHTCOLOR]
[COLOR GUIDE]
[ON]: The illumination color of [ZONE1] and [ZONE2] change to white
color when settings are performed on menu and list search, except in color
setting mode. ; [OFF]: Cancels.
*1 The illumination control wire connection is required. (Page 40)
*2 Some characters or symbols will not be shown correctly (or will be blank).
*3 Functionality depends on the type of phone used.
*4 If one of these color patterns is selected, the [ZONE1] and [ZONE2] illumination colors will
change to the default colors.
REFERENCES
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently
with a cotton swab. Be careful not to damage the
connector.
Handling discs
Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
When removing a disc from this unit, pull it out horizontally.
Remove burrs from the center hole and disc edge before inserting a disc.
More information
For: Latest firmware updates and latest compatible item list
JVC original application
Any other latest information
Visit <www.jvc.net/cs/car/>.
General
This unit can only play the following CDs:
DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc
Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot
be recommended.
For detailed information and notes about the playable audio files, visit
<www.jvc.net/cs/car/audiofile/>.
Connector (on the reverse
side of the faceplate)
JS_JVC_KD_T905BTS_K_EN_08.indd 31JS_JVC_KD_T905BTS_K_EN_08.indd 31 6/4/2018 11:36:06 AM6/4/2018 11:36:06 AM

Table of Contents

Other manuals for JVC KD-T700BT

Related product manuals