(No.MA606<Rev.002>)16/20
4.4 Service Information Clear Mode
Press and hold [2] key and [5] key and reset.
4.4.1 Default status immediately after the mode activation
It shall be same as normal activation.
4.4.2 Mode content
After entering this mode, Syscon shall clear the information stored for service and output the result to the display.
Cleared information changes will take place only after reset.
The following table shows the data that is cleared.
4.5 DC Error Information Mode
Press and hold [3] key and [6] key and reset.
4.5.1 Default status immediately after the mode activation
It shall be same as normal activation.
4.5.2 Mode content
Syscon shall display the following information after entering this mode.
Display Display content Details
Data Clear in
Progress
Data Clearing in Progress.
Data Clear OK Data cleared successfully.
Data Clear NG Data cleared with error, clear the data.
IIINTALIZE
TDA A CLR OK
TDA A CLR NG
Display Blinks (250ms interval)
Information to Clear Details Storage area
Service information
CD EJECT number of times display E2PROM
Forced Power OFF information display E2PROM
DC error information
DC error 1 display (wrong connection & other detection information in detecting duration) E2PROM
DC error 2 display (capacitor leakage detection number information) E2PROM
Tuner information
Tuner Area Setting E2PROM
Preset Frequency E2PROM
Preset PI code E2PROM
Tagging information Token data memory index E2PROM
Display content Details
When DC error is detected
When DC error is not detected
DC ERR
DC OK
Item Operation Display content Details
DC ERR1display
When wrong connection & DC error in other detec-
tion duration is detected.
When wrong connection & DC error in other detec-
tion duration is not detected.
DC ERR1 clear
Clear detection information when wrong connection
& DC error in other detection duration is displayed.
(Clear data flash)
DC ERR2 display
Display detecting number of times in capacitor leak-
age detection duration.
#: 0 to 4
DC ERR2 clear
Clear number of times for detection information in
capacitor leakage detection duration. (Clear data
flash)
DC 1 ER R
DC1 OK
DC1 OK
DC2 4
DC 2 0