EasyManua.ls Logo

JVC KD-X182BT - Radio Operations; Station Search Functionality; Storing Radio Stations; Station Tuning and Memory

JVC KD-X182BT
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM, AM, SW1 or SW2.
2 Press S / T (or press H / I on the remote control) to search for a
station automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until “M” flashes, then press repeatedly to search for a station
manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station is stored.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[TUNER SETTING]
[SSM]
[SSM01–06]/[SSM07–12]/[SSM13–18]: Automatically presets up to
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select [SSM07–12]/[SSM13–18] to store the following 12 stations.
[LOCAL SEEK]
[ON]: Searches only AM/SW1/SW2 stations with good reception. ;
[OFF]: Cancels.
Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
[IF BAND]
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ;
[WIDE]: Subjects to interference noises from adjacent FM stations, but sound
quality will not be degraded and the stereo effect will remain.
KD-X182BT_A9_B5A-4093-00_EN_2nd Draft.indd 7KD-X182BT_A9_B5A-4093-00_EN_2nd Draft.indd 7 17/1/2022 10:04:44 AM17/1/2022 10:04:44 AM

Related product manuals