JVC KD-X210 - GETTING STARTED; Initial Setup and Demonstration

GETTING STARTED
1 Press and hold MENU.
2 Turn the volume knob to select [DEMO], then press the knob.
3 Turn
the volume knob to select [DEMO OFF], then press the knob.
4
Press MENU to exit.
1
Press and hold MENU.
2 Turn the volume knob to select [CLOCK], then press the knob.
3 Turn
the volume knob to select [CLOCK SET], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day • Hour • Minute
5 Turn the volume knob to select [24H/ 12H], then press the knob.
6 Turn
the volume knob to select [12 HOUR] or [24 HOUR], then press the
knob.
7
Press MENU to exit.
1
Press and hold MENU. ·
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press MENU to exit. _
To return to the previous setting item or hierarchy, press~ PTY.
4
Default: XX
AUTO: The clock time is automatically set using the Clock Time (CT) data in
FM Radio Broadcast Data System signal.; OFF: Cancels.
ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
BEEP ON: Activates-the keypress tone.; OFF: Deactivates.
SRCSELECT
AM*
PANDORA*
I HEART*
AUX*
F/W.UPOATE
SYSTEM
F/Wxxxx
..
ON: Enables AM in source selection.; OFF: Disables.
ON: Enables PANDORA in sourc~ selection.; OFF: Disables.
ON: Enables IHEARTRADIO in source selection.; OFF: Disables.
ON: Enables AUXin source selection.; OFF: Disables.; BT ADAPTER: Select
when the KS-BTA1 00 Bluetooth adapter is connected to the auxiliary input
jack(+ 8). The source name will change to BT AUDIO.
YES: Starts upgrading the firmware.; N.Q: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http:/ /www.jvc.net/cs/car/>.
* Not displayed when the corresponding source is selected.