JVC KD-X250BT - Mounting and Removal Methods

Installing the unit
In-dash mounting
Make sure the direction
of the trim plate.
Bend the appropriate tabs
to hold the sleeve firmly in
place.
Do the required
wiring.
(A page 31)
When installing without the mounting sleeve
Bracket (not supplied)
Pocket
Flat or round head screws
(not supplied)
M5 × 8 mm (M5 × 3/8")
How to remove the unit
Installation/Connection
30
|ޓENGLISH
2012/11/22ޓ10:10:26KD-X250BT_J_EN