To Next PageTo Next Page
Need help?Do you have a question about the JVC KD-X330BTS and is the answer not in the manual?
General| Category | Car Receiver |
|---|---|
| Model | KD-X330BTS |
| Type | Digital Media Receiver |
| DIN Size | 1 DIN |
| Bluetooth | Yes |
| USB Ports | 1 |
| USB Input | Yes |
| AUX Input | Yes |
| Max Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Radio Tuner | AM/FM |
| SiriusXM Ready | Yes |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| Spotify Control | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Android Compatibility | Yes |
| iPhone Compatibility | Yes |
| Equalizer | 13-Band Graphic EQ |
| Audio Formats Supported | MP3, WMA |
| Display | Yes |
| Steering Wheel Control | Yes |
Warns of potential RF energy interference from modifications and user responsibility.
Highlights critical safety instructions to prevent accidents and damage.
How to connect USB, iPod, or Android devices and begin audio playback.
Connecting the SiriusXM tuner and activating the subscription.
Selecting channels, browsing categories, and manual tuning.
Using Replay to rewind and listen to paused content up to 30 minutes.
Steps for connecting a new Bluetooth-enabled device to the unit for the first time.
Handling incoming calls, answering, rejecting, and ending calls.
Making calls using stored contacts, phonebook, or recent call history.
Entering numbers manually and using voice commands for calls.
Operating the audio player on a connected Bluetooth device.
Selecting preset EQs and adjusting custom sound settings using EASY EQ.
Controlling Loudness, Fader, Balance, and Volume adjustments for sound output.
Setting amplifier gain, selecting speaker output type (SPK/PRE OUT), and speaker size.
Configuring crossover types (2-way/3-way) and high-pass filter frequencies.
Selecting audio signal routing for lineout terminals based on speaker connections.
Adjusting crossover frequencies and slopes for precise speaker tuning.
Setting speaker phase alignment and adjusting individual speaker gain levels.
Specific settings for speaker size, crossover, and gain in 2-way systems.
Specific settings for speaker size, crossover, and gain in 3-way systems.
Setting separate brightness levels for day/night and configuring information scrolling.
Solutions for no sound, wiring errors, and source selection problems.
Addressing poor radio reception and static noise during playback.
Resolving problems with file playback, skipped files, and device detection.
Solutions for sound issues, playback errors, and device control problems with Android.
Troubleshooting steps for when Bluetooth devices are not detected or cannot pair.
Resolving issues like echo, noise, interrupted playback, or lack of device control.
Step-by-step instructions for physically installing the unit into a vehicle's dashboard.
Detailed diagram and instructions for connecting all necessary wires for operation.
Specifies the function of output terminals for 2-way and 3-way crossover settings.
