JVC KS-FX240 User Manual

Adjusting the sound
You can adjust the treble/bass sounds and the speaker balance.
2 1
Cea.) Select the item you want to adjust.
BAS—>TRE—-FAR— SRL VOL
Indication To do: Range
BAS Adjust the bass ~6 (min.) — +6 (max.)
(bass)
TRE | Adjust the treble -6 (min.) — +6 (max.)
(treble)
FAD Adjust the front and rear speaker R6 (rear only) — F6 (front only)
(Fader)* balance
Esker tne Ae EPA BE GRE
BAL Adjust the left and right speaker L6 (left only) — R6 (right only)
(Balance) | balance
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Note:
* If vou are using a two-speaker system, set the fader level to “00” (center).
Adjust the level.
Note:
Normally the + and -— buttons work as the volume control buttons.
Sa you do not have to select “VOL” to adjust the volume level.
13
14
Storing
your
own
sound
adjustments
]
You
can
adjust
the
sound
modes
(BEAT,
SOFT,
POP:
see
page
12)
as
you
like
and
store
your
own
adjustments
in
memory.
1
Call
up
the
sound
mode
you
want
to
adjust.
See
page
12
for
details.
Within
2
5
seconds
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
: To turn on or off the loudness function
Each time you press LOUD, the loudness function turns on
Within
5 seconds
and off alternatively. (> go to step 4)
Adjust the bass or treble level.
See page 13 for details.
ria
ea
rr
ee
Press and hold SOUND until the sound mode
Ben
you
have
selected
in
step
1
flashes
on
the
display.
Your setting is stored in memory.
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat
the
same
procedure
and
reassign
the
preset
values
listed
in
the
table
on
page
12.
OveXsA-Sy Ovrxs-Sm

JVC KS-FX240 Specifications

General

Brand	JVC
Model	KS-FX240
Category	Car Receiver
Language	English