JVC KS-FX440 - Basic Operations; Radio Operations; Listening to the Radio

v-l
BASIC OPERATIONS “~}
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 15.
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
Select the source.
To operate the tuner, see pages 4 - 8.
To operate the tape deck, see pages 9 — 11.
To operate the CD changer, see pages 18 — 20.
Adjust the volume.
VoL OO al
Volume level appears.
Adjust the sound as you want (see pages 12 — 14).
To drop the volume in a moment
Press
6/1
ATT
briefly
while
listening
to
any
source.
“ATT”
starts
flashing
on
the
display,
and
the
volume
level
will
drop
in
a
moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press or: ATT for more than 1 second.
ENGLISH
Ls,
@® RADIO OPERATIONS
Listening to the radio
Z
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM to listen to an
FM station.
FM1—» FM2—> FM3—> AM—
Audio level indicator
ru: ALS VF |
To search stations of Start searching a station.
| —seu— [Ower frequencies. —_ When a station is received, searching stops.
2
SE
ey
ru:
GAS
lal
*\__
To
search
stations
of
higher frequencies.
To
stop
searching
before
a
station
is
received,
press
the
same
button
you
have
pressed
for
searching.
To tune in a particular frequency manually:
1 Press FM/AM to select the band.
2
Press
and
hold
WW
or
A
>
until
“M”
starts
flashing
on
the
display.
Now you can manually change the frequency while “M” is flashing.
3
Press
ki
Y
or
A
m4
repeatediy
until
the
frequency
you
want
is
reached.
*
If
you
hold
down
the
button,
the
frequency
keeps
changing
until
you
release
the
button.
OvexsA-Sy Ovyxs-SH