JVC KS-FX440 User Manual

| Storing stations in memory )
You can use one of the following two methods to store broadcasting stations in memory.
* Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
« Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
1
= po FM1— FM2—> FM3—» - 5
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
Press and hold the both buttons for more than
2 seconds.
me 55a se |
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
’
ENGLISH
Manual preset
You
can
preset
up
to
6
stations
in
each
band
(FM1,
FM2,
FM3
and
AM)
manually.
EXAMPLE:
Storing
an
FM
station
of
88.3
MHz
into
the
preset
number
1
of
the
FM1
band
Select the FM1 band.
eu: GALS / |
Tune into a station of 88.3 MHz.
See page 4 to tune into a station.
um: GAR / |)
Press and hold the button for more than 2
seconds.
(fe, BB9-Pi- 71
Preset number “P1” starts flashing for a while.
Repeat
the
above
procedure
to
store
other
station
into
other
preset
numbers.
Notes:
* A previously preset station is erased when a new station is stored in the same preset number.
*
Preset
stations
are
erased
when
the
power
supply
to
the
memory
circuit
is
interrupted
(for
example,
during
bauery
replacement).
If
this occurs,
preset
the
stations
again.
OveXA-SM Ovyxsa-Sy

JVC KS-FX440 Specifications

General

Brand	JVC
Model	KS-FX440
Category	Car Receiver
Language	English