25
Basic on-screen bar operations
1 Display the on-screen bar.
• Press once to display the
information bar.
• Press twice to display the
operation bar.
2 Select an item.
3 Make a selection.
• If pop-up menu appears...
1
or press the number buttons (see page 9).
2
To erase the on-screen bar
DVD -V
T02-C03 TOTAL 1:25:58
TIME TITLE CHAP
RPT
C. RPT
_ _
DVD -V
T02-C03 TOTAL 1:25:58
TIME TITLE CHAP
RPT
To search for a particular
point by playing time
• For VCD: while PBC is not in use.
1 Select
.
2 Enter the elapsed playing time of the current
title or of the disc.
Ex.:
DVD ] _ : _ _ : _ _
To enter 1 (hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then 0.
VCD ] _ _ : _ _
To enter 64 (minutes): 00 (seconds), press
6, 4, 0, then 0.
• It is always required to enter the hour
digit (even “0” hour), but it is not required
to enter trailing zeros (the last two digits
in the examples above).
• To correct a misentry, press @.
• You can also specify the elapsed playing
time by using % / fi / @ / #.
3 Finish the procedure.
To search for a particular
title/chapter/track
1 Select
TITLE
,
CHAP
, or
TRACK
.
2 Enter the number.
• To correct a misentry, press the number
button until the correct number is entered.
3 Finish the procedure.
Inst_KS-JA0502-4[U].indb 25Inst_KS-JA0502-4[U].indb 25 09.11.10 3:30:29 PM09.11.10 3:30:29 PM