JVC KW-ADV65BT Firmware Update

1 page

Firmware update

The  rmware for the following products has been updated.

Models: KW-ADV65BT, KW-AV61BT, KW-AV61, KW-AV51

This update the corresponding iPhone App was added.

Update Procedure:

1. Download the  rmware update  le “AV61_NSX_DVD_V0002.zip” and save it on your desktop.

2. Unzip it on to your desktop.

In the unzipped folder, you will see two  les “WUGFMU_XS2_51.SWP” and “VUP_info.cds”.

3. Copy these two  les onto USB  ash drive. Do not save them into any folder.

4. Insert USB  ash drive into the DVD receiver’s USB cable. (See  g1)

USB cable from the

rear of the unit

EN_KW-AV61JJW.indb 24 12/11/08 17:07

( g1)

5. On the <Setting> screen, press “System”, “down key”, and “Enter” of the System Information. (See  g2)

EN_KW-AV61JJW.indb 50 12/11/08 17:07

( g2)

6. Press “Update” of the DVD Version to start update. It takes almost two minutes. (See  g3)

EN_KW-AV61JJW.indb 50 12/11/08 17:07

( g3)

0001

G20.00.00

7. When the update has been completed successfully, “Update Completed” appears and the unit is reset.

8. After this update, the DVD Version in the System Information will be changed to “0002”.

Other instructions please see the instruction manual.

Other manuals for JVC KW-ADV65BT

Instruction Manual93 pages

Installation6 pages

Questions and Answers:

D
Dean MoralesSep 6, 2025
What does “Connection Error” mean on JVC KW-ADV65BT Car Receiver?
- J
  Jean BurkeSep 6, 2025
  The device is registered but the connection has failed. Connect the registered device.
J
Jody BrownSep 5, 2025
What does “No BT Dongle” mean on JVC KW-ADV65BT Car Receiver?
- S
  Samuel HorneSep 5, 2025
  The Bluetooth adapter (KS-UBT1) is removed.
S
samantha94Sep 4, 2025
Why is there a lot of noise generated on my JVC Car Receiver?
- M
  Michael OliverSep 4, 2025
  If a lot of noise is generated on your JVC Car Receiver, turn off (uncheck) “VoiceOver” of the iPod.
M
Melissa George DVMSep 3, 2025
Why does JVC KW-ADV65BT Car Receiver show “Parking Brake”?
- B
  beckyevansSep 3, 2025
  No playback picture is shown when the parking brake is not engaged.
J
Jay ThompsonAug 25, 2025
How to fix JVC KW-ADV65BT Car Receiver when no sound comes out of the speakers?
- N
  nrobertsAug 25, 2025
  If no sound is coming from the speakers of your JVC Car Receiver: * Adjust the volume to the optimum level. * Check the cords and connections.
S
Steven AlexanderSep 2, 2025
What does “Restricted Device” mean on JVC KW-ADV65BT Car Receiver?
- D
  Donald RogersSep 2, 2025
  If your JVC Car Receiver displays “Restricted Device”, check whether the connected iPod/iPhone is compatible with this unit.
J
Jeanette ChangSep 1, 2025
What to do if JVC KW-ADV65BT Car Receiver displays “Eject Error” / “Loading Error”?
- A
  Anthony MercadoSep 1, 2025
  If your JVC Car Receiver displays “Eject Error” or “Loading Error”, eject the disc forcibly.
J
Jacob MurrayAug 31, 2025
What does “No Signal” mean on my JVC KW-ADV65BT Car Receiver?
- W
  William TorresSep 1, 2025
  If your JVC Car Receiver displays “No Signal”: * Start playback on the external component connected to the VIDEO IN jack. * Check the cords and connections. * The signal input may be too weak.
T
tmorganAug 31, 2025
Why is there no picture displayed on the JVC KW-ADV65BT Car Receiver screen?
- M
  Mary ColemanAug 31, 2025
  If no picture is displayed on the screen of your JVC Car Receiver, turn on the screen.
R
robertspamelaAug 30, 2025
What to do if JVC Car Receiver displays “USB Device Error”?
- S
  stonedeannaAug 30, 2025
  If your JVC Car Receiver displays a “USB Device Error”: * Turn the unit off and then on again. * Try connecting a different USB device.

JVC KW-ADV65BT Specifications

General

Resolution	800 x 480 pixels
Bluetooth	Yes
USB Ports	1
AUX Input	Yes
DVD Player	Yes
CD Playback	Yes
Preamp Outputs	3 (front, rear, subwoofer)
Radio Tuner	AM/FM
GPS Navigation	No
Steering Wheel Control Compatible	Yes
Rear View Camera Input	Yes
Audio Formats Supported	MP3, WMA
Video Formats Supported	MPEG-1, MPEG-2
Power Output	50W x 4
Equalizer	13-band
RMS Power Output	22W x 4 Channels