To Next PageTo Next Page
How to fix JVC KW-R500 with no sound or static noise?
If you are getting no sound, interrupted sound, or static noise from your JVC Car Receiver, begin by checking the condition of the disc, connected device, and recorded tracks. Also, inspect the cords, antenna, and cable connections to ensure they are properly connected.
Why JVC KW-R500 does not display correct characters?
If the correct characters are not displayed on your JVC Car Receiver (e.g., album name), note that this unit can only display uppercase letters, numbers, and a limited number of symbols.
Why my iPod/iPhone does not work with JVC KW-R500 Car Receiver?
If your iPod/iPhone does not turn on or work with the JVC Car Receiver, check the connection between the unit and your iPod/iPhone. If problems persist, detach and reset the iPod/iPhone using a hard reset. Also, check whether the setting is appropriate.
What to do if JVC KW-R500 displays 'NOT SUPPORT'?
If “NOT SUPPORT” appears on the display of your JVC Car Receiver and the track skips, verify that the track is in a playable file format.
What to do if JVC KW-R500 shows 'MISWIRING CHK WIRING' error?
If the message “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on the display of your JVC Car Receiver, make sure the terminals of the speaker leads are properly insulated with tape before resetting the unit. If the message persists, consult your JVC car audio dealer or kits supplying company.
What to do if “PLEASE” and “EJECT” appear on JVC KW-R500?
If “PLEASE” and “EJECT” appear alternately on the display of your JVC Car Receiver, press the eject button, then insert the disc correctly.
How to fix no sound on JVC Car Receiver?
If your JVC Car Receiver isn't producing any sound, or the sound is interrupted, or you hear static noise, check the cords, antenna, and cable connections. Also, check the condition of the disc, connected device, and recorded tracks.
What to do if JVC KW-R500 cannot detect connected device?
If your JVC Car Receiver cannot detect the connected device, try reattaching the device.
Why my JVC Car Receiver does not work?
If your JVC Car Receiver isn't working at all, try resetting the unit.
General| Audio system | MOS-FET |
|---|---|
| MP3 playback | Yes |
| DVD Audio playback | No |
| Audio formats supported | MP3, WMA |
| Tuner type | HS-IVi |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| Output power | 200 W |
| Product color | Black |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 3 |
| Maximum power per channel | 50 W |
| USB version | 2.0 |
| USB ports quantity | 1 |
| Output voltage | 2.5 V |
| Key illumination color | Blue |
