JVC KW-R700BT - Setting the Radio Timer; Naming Stations

Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.
(Hold)
1
-<TUNER>
-<RADIO TIMER>
-<OFF>/<ONCE>/
<DAILY>
[OFF] Cancels Radio Timer.
ONCE Activates once.
DAILY Activates daily.
2
-<FM>/<AM>
-<01> ... <18> for FM/
<01> ... <06> for AM
3
Select the preset station.
4
Set the activation time.
5
Press MENU to exit.

 lights up after the Radio Timer has been set.

Only one timer can be set. Setting a new timer
will override the previous setting.

The Radio Timer will not activate if the unit is
turned off or if <AM> is set to <OFF> after
selecting an AM station for the timer.
Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.
1
Select <FM> or <AM>.
(Hold)
(Hold)
2
Enter “Name Entry” menu.
Move
Select
Select the desired character (A to Z, 0 to 9, —, /, <,
>) or a space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.
3
Enter the desired name.
4
Press the control dial to confirm.

If you try to assign names to more than 30
station frequencies, “NAME FULL” appears.
Delete unwanted names before assignment.
To erase the entire name, press and hold DISP
after step 2, then press the control dial.
Radio
ENGLISHޓ|
7
2011/12/14ޓ10:37:35KW-R700_U_EN