8
Data Size:  B6L (182 mm x 128 mm)
Book Size:  B6L (182 mm x 128 mm)
  Select a stored station
Press   or one of the number buttons (1to6).
  (or)
1  Press  .
2  Turn the volume knob to select a preset number, then press the 
knob to confirm.
Other settings
1 
Press and hold  .
2  Turn the volume knob to select [
TUNER
], then press the knob.
3  Turn the volume knob to select an item 
(
see the following table
)
, 
then press the knob.
4  Repeat step 3 until the desired item is selected/activated or follow 
the instructions stated on the selected item.
5  Press   to exit.
To return to the previous setting item, press  .
Default: 
XX
RADIO TIMER (  6)
SSM
SSM 01 – 06
 / 
SSM 07 – 12
 / 
SSM 13 – 18
: Automatically presets up to 
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored. 
Select 
SSM 07 – 12
 / 
SSM 13 – 18
 to store the following 12 stations. 
LOCAL SEEK ON
:Searches only FM stations with good reception.; 
OFF
:Cancels.
•  Settings made are applicable only to the selected source/station. Once 
you change the source/station, you need to make the settings again.
IF BAND AUTO
:Increases the tuner selectivity to reduce interference noises from 
adjacent FM stations. (Stereo effect may be lost.); 
WIDE
:Subjects to 
interference noises from adjacent FM stations, but sound quality will not be 
degraded and the stereo effect will remain.
ANALOG RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient 
signal strength.
Search for a station
1 
Press   repeatedly to select FM or AM.
2  Press   to search for a station automatically.
  (or)
  Press and hold   until “M” flashes, then press repeatedly to 
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
  Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
  (or)
1  Press and hold the volume knob until “PRESETMODE” flashes.
2  Turn the volume knob to select a preset number, then press the 
knob.
    The preset number flashes and “MEMORY” appears.
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd   8JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd   8 3/11/2015   9:00:00 AM3/11/2015   9:00:00 AM