ENGLISH 19
TUNER TUNER
Listening to the radio
R Indications and buttons on the source
control screen
132
74
56 p89
q
w
Tuner reception information
1 STEREO/MONO indicator
• The STEREO indicator lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
2 NEWS indicator
3 AF indicator
4 TI indicator
5 Seek mode
6 LO indicator (Page20)
7 Preset no.
8 RDS indicator: Lights up when receiving a Radio
Data System station.
9 EON indicator: Lights up when a Radio Data
System station is sending EON signals.
p The station frequency currently tuned in
q Band
w Text information
• Pressing [H] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text]
switches the information
between Radio Text, Radio Text Plus, and PTY
code.
Operation buttons
[P1] – [P6] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[Mode]
Changes the settings for tuner
reception on the <Tuner Mode>
screen. (Pages20 and 22)
[SSM ] *
Presets stations automatically.
(Page20)
[TI]*
Activates/deactivates TI standby
reception mode. (Page21)
[MONO]*
Activates/deactivates monaural
mode for better FM reception.
(Stereo effect will be lost.)
• The MONO indicator lights up
while monaural mode is activated.
[Text] Changes the display information.
(See the right column.)
[PTY]*
Enters PTY search mode. (Page21)
[AM] Selects the AM band.
[FM] Selects the FM band.
[Seek] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual Search
[S] [T]
Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
*
Appears only when FM is selected as the source.
R Changing the display information
The preset list containing the station names for FM
Radio Data System (when a PS signal is coming in) is
displayed.
• Press [Text] again to display the text information
for the station currently being received.
KW-VEntryE.indb19KW-VEntryE.indb19 2014/09/0911:322014/09/0911:32
To Next Page
Loading...
