ENGLISH 35
BLUETOOTHBLUETOOTH
R Setting items
<Phone
Device>
Shows the connected phone device
name.
< Auto
Response>
• ON: The unit answers the incoming
calls automatically .
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
< SMS
Notify>
• ON (Initial): The unit informs you of
the arrival of a message by ringing
and displaying “Receiving Message”.
• OFF : The unit does not inform you
of the arrival of a message.
<Ring
Mode>
• System (Initial): The ring tone set on
the unit is used.
• Phone: The ring tone set on the
mobile phone is used. (This function
may not work depending on the
mobile phone.)
<Ring Tone
Change>
When <Ring Mode> is set to
<System>, press [Enter], then select
the ring tone for received calls and
SMS from <Tone1> (Initial), <Tone2>,
<Tone3>.
• Call Tone: Selects the ring tone for
phone calls.
• Message Tone: Selects the ring
tone for SMS.
Using the Bluetooth audio player
• To register a new device, see page28.
• To connect/disconnect a device, see page30.
R Indications and buttons on the source
control screen
21345
6
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
Playback information
1 Playback mode
2 Track no.*
1
3 Playback status*
1
4 Playing time*
1
5 The signal strength and battery level (only when
the information is acquired from the device)
6 Tag data (current track title/artist name/album
title)*
1
• Pressing [H] scrolls the text if not all of the text
is shown.
Operation buttons
[ ]
Selects Repeat playback mode.*
1
*
2
[ ]
Selects Random playback mode.*
1
*
2
[S] [T]
• Selects a track. (Press)
• Reverse/forward search. (Hold)
[I]
Starts playback.
[W]
Pauses playback.
*
1
Available only for devices compatible with AVRCP 1.3.
*
2
To cancel random and repeat mode, press the button repeatedly
until the indicator disappears.
KW-VEntryE.indb35KW-VEntryE.indb35 2014/09/0911:332014/09/0911:33
To Next Page
Loading...
